Moto17 发表于 2024-5-13 14:00:19

凯旋 Triumph 使用TigerTool最新版全系列车型免费清除保养提示教程【202405】

本帖最后由 Moto17 于 2024-6-1 22:23 编辑

TigerTool V3.51 is now released.{:4_106:}




【原文】
V3.51 includes features to allow the user to do the following:-
• Reset the service interval and clear the 'service due' wrench symbol from the instruments
• Configure ABS / TPMS menu items & default distance units for the instruments
• Read & clear diagnostic trouble codes (DTCs) and the Malfunction Indicator Light (MIL)
• Read & clear ABS DTCs
• Bleed ABS brake modulator
• Check throttle body balance
• Read, enable/disable & program TPMS sensors
• Erase Immobiliser/TPMS DTCs and monitor live TPMS data
• Read VIN, ECU serial & engine map reference codes

New features and bug fixes since V3.3 was released:-
• Supports wider range of interfaces by removing the use of the 'AT D' command
• Added support for OBDLink Bluetooth interfaces (e.g. LX, MX etc)
• Updated VIN check for alphanumeric VINs beginning after 'A'
• Added VIN decode support for Tiger Sport 660, Trident 660 & Gen4 Tiger 1200
• Fixed a bug with the way the miles/km units type is decoded on some models
• Fixed service date reset bug
• Changed tests for identifying if TFT display is used
• Added 65 new Chassis DTCs for Tiger 900
• Added support for bikes with no VIN after ECU replaced (see below)


【翻译】
V3.51包括允许用户执行以下操作的功能:-
•重置维修间隔,并清除仪表上的“到期维修”扳手符号
•配置ABS/TPM菜单项和仪表的默认距离单位
•读取并清除故障诊断码(DTC)和故障指示灯(MIL)
•读取并清除ABS故障诊断码
•给ABS制动调节器放气
•检查节气门体平衡
•读取、启用/禁用和编程胎压监测系统传感器
•清除防盗系统/胎压监测系统故障诊断码并监测实时胎压监测数据
•读取VIN、ECU序列号和发动机地图参考代码

V3.3发布以来的新功能和错误修复:
•通过取消使用“AT D”命令,支持更广泛的接口
•增加了对OBDLink蓝牙接口(如LX、MX等)的支持
•更新了从“A”之后开始的字母数字VIN的VIN检查
•增加了对Tiger Sport 660、Trident 660和Gen4 Tiger 1200的VIN解码支持
•修复了某些型号上英里/公里单位类型解码方式的错误
•修复了服务日期重置错误
•更改了用于识别是否使用TFT显示器的测试
•为Tiger 900添加了65个新的底盘DTC
•在更换ECU后,增加了对无VIN自行车的支持(见下文)


【资料】
TigerTool V3.51 Service Utility Software最新版说明-英文版
TigerTool V3.51 Service Utility Software最新版说明-中文版(机翻)
TigerTool最新软件工具(点击下载)
本站教程,参见方法二(点击查看)


【结语】
1,使用Vgate ICar2 OBD设备大约40元(目前最便宜的OBD设备,多多或某宝都可以买到,或其他支持的设备,需要自行测试)
2,最新版于2024年2月发布,本人暂时没有时间做实战测试,仅作为资料搬运工和使用教程经验分享,具体使用情况以实际为准
3,如果可以使用,麻烦您支持下这个帖子,如不能使用,也请您回复这个帖子,我会向软件著作者发送问题留言并追踪解决问题


【BUG跟进】
1,2024年6月1日有用户反馈凯旋660仍然不能重置服务间隔,联系作者得知由于660的特殊性目前还在修复中,预计下个版本修复,持续跟进中~
{:11_659:}

rocket 发表于 2024-5-14 09:00:44

漂亮,先下载保存。:lol

aliensung 发表于 2024-5-14 10:46:19

有机会试试但这个这个你重新打包过了么:o

Moto17 发表于 2024-5-14 10:55:42

rocket 发表于 2024-5-14 09:00
漂亮,先下载保存。

感谢支持,试好了说下哈~

Moto17 发表于 2024-5-14 10:56:30

aliensung 发表于 2024-5-14 10:46
有机会试试但这个这个你重新打包过了么

感谢支持,请尊重劳动成果~

aliensung 发表于 2024-6-1 22:01:49

Moto17 发表于 2024-5-14 10:56
感谢支持,请尊重劳动成果~

并没有用
新版本可以读到ecu 可以check abs和dtc
但是重置保养间隔提示失败

Moto17 发表于 2024-6-1 22:19:31

本帖最后由 Moto17 于 2024-6-1 22:24 编辑

aliensung 发表于 2024-6-1 22:01
并没有用
新版本可以读到ecu 可以check abs和dtc
但是重置保养间隔提示失败
你好,联系过作者了,对660系列做了优化可以读取ABS和DTC,由于660的解码特殊性导致重置服务间隔还存在BUG,预计下个版本发布修复~ 持续跟进中~{:11_660:}

she1998 发表于 2024-6-5 16:00:18

别的车有吗?

Moto17 发表于 2024-6-5 16:12:05

she1998 发表于 2024-6-5 16:00
别的车有吗?

TUNEECU支持市面上90%以上车型,就是收费贵。免费方案目前覆盖车型较少~

705522148 发表于 2024-6-12 02:37:25

Moto17 发表于 2024-6-5 16:12
TUNEECU支持市面上90%以上车型,就是收费贵。免费方案目前覆盖车型较少~

准备测试下 老款 765
页: [1] 2
查看完整版本: 凯旋 Triumph 使用TigerTool最新版全系列车型免费清除保养提示教程【202405】